Starbase Easy Fix For All Ship Bugs With Tips

Introduction

Until all bugs are resolved, here are a few recommendations you should follow to avoid bugging out your ship.

Don't buy a bugged ship. Only buy premade ships from people who know how to build them.

Shops sell player-made ships and some are harder to run properly. Ask the community if you aren't sure.

Beside the Laborer Module, a good starter ship is the Hauler.

You can find a lot of good beginner ships in the Sunny Ship Center.

If you've got a few more credits, you could go for a Worker Ant.

From there, a good upgrade could be the Trident or the Marmot-ST.

Don't use the easy build mode. And don't enter the easy build area.

Simply deactivate easy build mode permanently by pressing period (.)

Don't use ship modules. Use ship parts instead. Ship modules are for easy build mode only and you should avoid them.

Make all modifications to your ship out in space.

Use c to snap pieces. Use x, y, z to rotate them.

Weld all beams together. Beams need at least 2 attach points.

Then, bolt everything together and don't forget to place cables and pipes where appropriate.

Or you can use the ship design workshop.

You need a blueprint to make modifications in the design workshop. You can't import from space a ship you already own.

Check if you did everything right with the durability tool. All pieces should be green. Use it in the workshop

Or use it with the universal tool. Press u, then top right in the blueprint tab.

If all else fails, get a new ship.

You can easily get a brand new starter ship by doing the repair tutorial again. Go to settings > tutorial > repair job.

Good luck!

Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2568299171