RAILROADS Online! Grade level roundhouse guide

Info

Ignore any trestle bridge sections you see in the images, they are not needed !You will still need the bridges with handrails

Step 1

Place track and in the end of that track place a turntable

Step 2

Place a crosstrack and rotate the turntable to place another one and try eye ball a triangle like in the image, repeat this step for as many engine sheds you want/can fit

Step 3

Place 14 meter bridge section in the end of the crosstrack and then place 22-25 meter section of bridge in the end of the 14 meter bridge as seen in the second image and repeat until every crosstrack is done

Step 4

Delete the 14 metre bridge sections

Step 5

Use the mouse and WASD keys to align the engine house to the middle bridge section

Step 6

Use the WASD keys to get the right alignment and height of engine shed, the engine shed track should be either a bit lower or higher then the front board of the 22-25 metre bridge section, look at the image

Step 7

Use the front board of the bridge to align ground works, then eye ball the ground work to the corner of the shed and place it, result in the last image, later use same method to do the other engine shed in the front. The sides and back you can do as you are finished with other parts roundhouse

Step 8

Rotate roundtable like its in image 1 and place the first track, then look at image 2 and see how to place the second track, repeat for other sheds

Deleting The Crosstrack

Aim about where im aiming and delete crosstracks and anything else what is not needed anymore

Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2943984711

Grade level roundhouse guide