Rail Placement In Relation To The Platform
This guide is short and meant to be a visual guide to helping you successfully load your boxcars with tool crates.
Start by laying your rail further away from the platform than you're (probably) normally used to. For me, it was a half a rail width further away than my normal.
The height of the top of the rail comes up to almost even with the top of the platform.
The main issue with boxcars is the roof is part of the collision model. As such, if the car sits too low, the boxes bounce off the roof and disappear. You need to get the car high enough so most of the crate clips into the boxcar when its loaded.
That's it. Just make sure you are far enough away from the platform, and the car is high enough that the crate's hitbox clips into the boxcar when loaded. Hopefully this helps.
Regards,
Comrade_Bob
Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2647004615
More RAILROADS Online! guilds
- All Guilds
- 2-4 Double Cross Over (Inspired by "illudedPerception's" post)
- How to fly - simple, convenient and fun
- How to build a track parallel to the platform
- RAILROADS Online! Guide 367
- How to make your train go FASTER!!!
- Long truss bridge guide
- Stage your new cars quicker: Hump Yard Physics
- Aurora falls map with pre placed industry heights
- Load calculator for the grades.
- Mouse sensitivity adjustment for the game