SnowRunner - Improve Grip = Better Traction

SnowRunner - Improve Grip = Better Traction

Description How It Works!

Who plays SnowRunner knows that sometimes we have boring moments being stuck more often than driving but that's really the focus of the game, but that I think sometimes makes the game a little frustrating and boring! This could easily be more enjoyable for some players if there is a difficulty setting mode! I'll show how can improve the grip by modifying some values with Notepad!

Step 1 - Locate The Installation Folder!


SnowRunner - Improve Grip = Better Traction image 3

Go to Library in the Steam App! Right click on the Game! Then follow: Manage-Browse Local Files!

Step 2 - Locate The ''initial.pak'' File!


SnowRunner - Improve Grip = Better Traction image 6

Follow - Preload : Paks : Client : initial.pak! Open ''initial.pak'' file needs WinRar or similar!

Step 3 - Locate The ''trucks.xml'' File!


SnowRunner - Improve Grip = Better Traction image 9

Follow - Media : Templates : Trucks.xml! Open ''Trucks.xml'' file with Notepad or similar!

Step 4 - Locate And Change Values!


SnowRunner - Improve Grip = Better Traction image 12

There are 11 different types of tires and characteristics of each one! The Red Arrows in the image indicate the values to modify! Important: Do not increase the values too much, this could create too much grip and the truck will not move! There is a Link at the bottom of the page with the original file and mine edited!

Step 5 - How To Choose Values!


SnowRunner - Improve Grip = Better Traction image 15

Change the values modestly, I suggest doubling the lower values and increasing the higher values by 50% to 70%! I've been using the values in the image below for a long time! After modifying close the window save the file and that's it! There is a Link at the bottom of the page with the original file and mine edited!

Step 6 - Important Notes!

Backup your Original ''Trucks.xml'' File! Once you have your file modified, save a backup of it too! Why Backups: When the game receives an update on Steam it will replace your modified file with the original one! After the Update you just need to replace the file! To replace the Original file with the Modified one just open the ''initial.pak'' file with Winrar then follow Media-Templates and drag or paste and replace, follow Step 3!

Notes!

SnowRunner Link - Trucks.xml Files: Original & Edited[drive.google.com] I hope this was reliable and helpful! Any questions, leave them in the comments!

Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2936810849					

More SnowRunner guilds