Animaze How to Set The Tracker at 60 FPS

How To Set The Tracker At 60 FPS

How to Set The Tracker at 60 FPS image 3

How to Set The Tracker at 60 FPS image 4

How to Set The Tracker at 60 FPS image 5

How to Set The Tracker at 60 FPS image 6

How to Set The Tracker at 60 FPS image 7

How to Set The Tracker at 60 FPS image 8

1. Launch Animaze

a. In the main Animaze window press the following keys combination: Ctrl + Shift + F3

b. The Performance Tracker will appear in the top right corner

2. Click on the Animaze drop-down menu and select Settings

3. Click on Video Graphics

4. Make sure that the "Webcam & FPS" option is set to 60 FPS

(for example, 1280 x 720 @ 60)

5. If the Performance Tracker (from point a.) does not show the camera running at 60 FPS, you will need to open the Advanced Camera Dialog window from the Video Graphics tab

Important - the camera's FPS are shown by the Camera_FPS indicator!

6. In the Advanced Camera Dialog window switch to the "Camera Control" tab

7. Turn off the "Low Light Compensation" option

8. The Performance Tracker should start showing that Animaze is getting 60 FPS from the web-camera

NOTE: it is not mandatory that the Camera_FPS indicator show 60 FPS. Between 59 and 60 is a good FPS rate.

PRO TIP: For the best experience go to Settings > General and select the "High (60 FPS) tracking profile (from the Tracking Profile Defaults option) , and then calibrate Animaze.

Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2398748153

How to Set The Tracker at 60 FPS

How To Set The Tracker At 60 FPS

More Animaze guilds