My Garage Jesse(Car) Rust Removal Guide

Disclaimers

As most of the players know, Rust Removal and Repaint jobs have been some of the most lucrative work in My Garage. However with the addition of the Jesse type car, this has become a bit more frustrating. This is a quick guide to removing rust from the Jesse car body parts, until Viking can get around to fixing the mesh. Specifically the parts that gave me the most difficulty was the inner walls of the trunk.

This guide will showcase those specific areas.

Dislclaimer 2:

This guide is intended for English speakers, and contains a sprinkle of humor throughout. No OSHA violations were committed in the making of this guide. Please ensure to wear appropriate protective gear when working with paint and rust. Eye protection and a N95 type respirator are highly recommended, I am not responsible for any harm you do to yourself or others by following this guide.

This is my first guide, please be patient if I need to amend or edit anything. Comments and questions are always welcome.

End of Disclaimers.

Rust Removal & Paint

Getting into the bed of the Jesse car is an absolute nightmare if you try to do it without some help.

Removing rust from the inner walls of the bed gave me the worst time, and I would find myself cutting the walls off with a disc cutter, buying a whole new panel, painting it, and welding it back on just to get the job done. Recently I just had enough and decided to figure out how to do this the easier/cheaper way. I'm now sharing the fruits of my labor with you dear reader.

Let us begin.

In order to remove the rust, we must get into the bed of the trunk. This can be done by grabbing the step ladder, and placing it next to the trunk lid. The best spot I found was in one of the corners, as pictured here.

Then by jumping up the ladder from the side, not the front.

We ascend the ladder like the absolute unit we are. OSHA be darned.

From here, jumping into the bed should be easy. Try to jump and aim for the midsection between the trunk floor, and trunk lid. If the trunk lid begins to vibrate furiously simply move forward a touch and more often than not, you'll get right up in there. From here, you are free to move around in the trunk of the Jesse. Good Work!

Now for rust removal.

By using a combination of crouching(Default: L-Ctrl), and the proven method of Finnish Headbutt/Lean(Default: Q), you want to get as close as possible to the rust while holding your grinder-sanding wheel combo. You REALLY want to get in there, to the point where you clip into the body. Make sure to move closer and further as needed.

Finally, after many well placed swear words as you cough up paint dust and rust flakes, we're done. You can exit the trunk of the Jesse and paint as normal.

Thanks For Reading/Trivia

Thanks for reading my guide. Feel free to leave a comment below. If this guide was helpful please give it a thumbs up.

Trivia

-The Jesse Car is based off the Chevrolet: El Camino(possibly third Generation) and was named for Jesse Pinkman from the Breaking Bad Series. This is also why my guide icon is Jesse from breaking bad.

-This was a customer car. The fact that it's Pink(Pinkman) was a absolute coincidence.

Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2915535529

Jesse(Car) Rust Removal Guide

Disclaimers

Rust Removal & Paint

Thanks For Reading/Trivia

More My Garage guilds