This is how to make a vehicle hover without those noisy and laggy thrusters.
Guide To Making Hover Vehicle
So here I will show you how to make a hover vehicle in 5 easy steps!
Step 1 (shown In Red)Get a 24x12x1 brick.
Step 2 (shown In Orange)Put 2 rederector 1x1x1 04 on each corner.
Step 3 (shown In Yellow)Put axle 1x2x1s on all rederectors, invert the steering on the backwards facing ones and give the front axles a steering angle of 30.
Step 4 (shown In Green)Put the 3x4s wheel on all axles.
Step 5 (shown In Blue)
Put a drivers seat and an engine on.
And whalla! now you have your very own hover vehicle!
Source: https://gameplay.tips/guides/8128-brick-rigs.html
More Brick Rigs guilds
- All Guilds
- Brick Rigs - Dive Bombing Guide
- Brick Rigs - Spring Gun Mechanism
- Brick Rigs - Civilian Beginner Guide
- Brick Rigs - How Actuators Act (Phasing Though Objects)
- Brick Rigs - Guide to Realistic Detector Gun Smoke
- Brick Rigs - How to Properly Phase Shift (No Offset)
- Brick Rigs - How to Build Zombie Apocalypse Vehicles
- Brick Rigs - How to Turbocharge Vehicle
- Brick Rigs - Guide to Armor Types