Modify The ECU Settings
If you want the automatic transmission to perform better, you need to tune your car using an aftermarket ECU (which is installed and accessed via the glovebox)
Access the ECU via the glovebox and set the power curve for maximum low down torque.
The settings I used for my power curve were 25,25,25,20,0,0
"The auto box will always change up when it runs out of puff at the top end, so changing the up shift point doesn't matter. The problem is that it is always too late to downshift, and can leave you stuck at 2000rpm for several seconds regardless of what you do.
So, the solution is to tune for maximum low end torque. So crank up the first 3 numbers as far as you can, and reduce the last 2 to 0. Combined with the turbo set at say, 10PSI with traction control on maximum, this is actually quite fast."
Credit to Pete for this information
Source:- Comments section of https://steamcommunity.com/app/1520370/discussions/0/3785876820732485725/
Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2997589762
More Mon Bazou guilds
- All Guilds
- The start of the game
- Mon Bazou Guide 403
- How to make Poutine
- How to get weed
- How to start the game
- Mon Bazou Must-Haves
- How To Add Music To The Game (From Spotify)
- All Pre-Installed Konig Parts
- ( ) Mon Bazou
- BMW E36 | Mon Bazou (Konig)