Arma Reforger Windows Dedicated Server Guide

Before We Start

Before we start, you will need:

This page open: https://community.bistudio.com/wiki/Arma_Reforger:Server_Hosting

This page open: https://community.bistudio.com/wiki/Arma_Reforger:Startup_Parameters

The Arma Reforger Server installed from the "Tools" section of Steam.

Setup

Throughout this guide, I'll assume that you have file name extensions turned on in Windows Explorer as it will make changing file types much easier. If you don't you can turn it on as shown here:

In your Arma Reforger Server directory (normally C:\Steam\steamapps\common\Arma Reforger Server):

1. Create a new directory, call it "configs".

2. Create a new file and name it "launch.bat".

Inside the configs directory we created before:

1. Create a new text file and name it "config.json"

Launch.bat

Right click on launch.bat and select "Edit".

Enter the below command:

ArmaReforgerServer.exe -config ".\configs\config.json" -profile ArmaReforgerServer

Save and close the file.

Config.json

In the configs folder, edit config.json and enter the below contents, replacing any values indicated with <brackets> to be whatever you would like.

For example, if your server was in the USA, you would change "<your_country>" to "US".

For more information on any of these config options, review the Wiki pages we opened right at the start.

A list of possible values for the "scenarioId" field is located under the 2nd link from the start of the guide.

{ "dedicatedServerId": "", "region": "<your_country>", "gameHostBindAddress": "", "gameHostBindPort": 2001, "gameHostRegisterBindAddress": "", "gameHostRegisterPort": 2001, "adminPassword" : "<your_admin_password>", "game": { "name": "<your_server_name>", "scenarioId": "<your_mission_id>", "playerCountLimit": 64, "password": "<your_password>", "visible": true, "gameProperties": { "serverMaxViewDistance": 1600, "battleEye": false, "fastValidation": true }, "mods": [] } }

If you don't wish to have a password, change that line as follows:

"password": false,or

"password": "",You will need to test this, as there's been a variety of reports about what does and doesn't work here.

Done!

That's everything you need to do. You can now launch the server by double-clicking on the launch.bat file we created, or you can review the Wiki links and tweak values in the config.json file.

Good luck!

Known/Common Issues

Unable to connect to the server

1. Check that the program and ports are allowed through the Windows Firewall, and any hardware firewall in routers etc.

2. The is a current issue believed to be within the Steam network giving connection issues as well. Leave it a bit and try again.

Server Not Showing in Server Browser

1. Check your Steam connection - Restart the Steam client and then restart the server by double-clicking on "launch.bat" again.

Black screen when connecting

1. Add the public IP address of your server to the "gameHostRegisterBindAddress" field in "config.json"

Some 5614BBCCBB55ED1C error

1. The server can't find your config.json - check your config path and content are correct.

Source: https://steamcommunity.com/sharedfiles/filedetails/?id=2809494879

Windows Dedicated Server Guide